JetComp 9509 2mil White Metallized Poly Film

2mil White Metallized Poly Film

2mil White Metallized Poly Film is a high-gloss, FDA compliant flexible packaging film engineered for premium snack and pouch proofing applications. This two-layer construction combines 0.7 mil metallized OPP with a 1.3 mil white PET outer layer to deliver strong barrier protection, heat seal performance, and vibrant print presentation.

Mounted on a strippable liner for stable transport and aqueous wide format printing, this metallized film supports accurate flat proofs and short-run flexible packaging prototypes.

---

Why Choose 2mil White Metallized Poly Film

When snack packaging prototypes require metallic barrier properties and shelf appeal, this film delivers both structure and performance.

• Two-Layer Metallized Construction: 0.7 mil metallized OPP combined with 1.3 mil white PET for enhanced durability and barrier strength.
• FDA Food Grade Compliant: Approved for food contact applications when properly sealed.
• Heat Sealable Performance: Seals at 230 to 295°F for strong and consistent seam integrity.
• High Gloss Finish: Provides premium visual impact for retail snack packaging.
• Moisture and Odor Barrier: Protects contents from environmental exposure.

---

Applications

• Flexible packaging proofing
• Chip and snack food bags
• Stand up pouches
• Retail snack packaging prototypes
• Metallic packaging mockups

---

Key Features

• 2 mil total thickness
• 0.7 mil metallized OPP inner layer
• 1.3 mil white PET outer layer
• High gloss surface finish
• FDA compliant for food contact
• Heat sealable at 230 to 295°F
• Strong seam seal performance
• Good moisture and odor barrier
• Mounted on strippable liner
• Compatible with aqueous wide format printers
• Available in 24 inch x 50 foot and 24 inch x 100 foot rolls

---

Specifications

• Film Type: Metallized OPP with white PET outer layer
• Total Thickness: 2 mil
• Surface Finish: High gloss
• Compliance: FDA food grade compliant
• Heat Seal Temperature: 230 to 295°F
• Barrier Properties: Moisture and odor resistant
• Liner: Strippable liner for stable printing
• Available Sizes:
  • 24 inches x 50 feet
  • 24 inches x 100 feet
• Item Numbers:
  • 9509-24-50
  • 9509-24-100

---

Compatibility

2mil White Metallized Poly Film is compatible with aqueous wide format printers, including:

• Epson SureColor P-Series printers
• HP DesignJet printers
• Canon imagePrograf printers

For thicker constructions, apply 8200 clear or 8201 matte over-laminate film. For a thinner matte appearance, apply Krylon 53530 Flat Acrylic Crystal Clear spray.

---

FAQ

Is this film suitable for snack food packaging prototypes?
Yes. Its metallized layer and barrier properties make it ideal for chip and snack packaging mockups.

What temperature range should I use for heat sealing?
Seal between 230 and 295°F to achieve strong seam performance.

Can this be used for flat proofing only?
Yes. You can print it flat for proofing or convert it into assembled pouch structures.

Does the metallized layer affect printing?
The white PET outer layer provides a printable surface while maintaining metallic barrier performance beneath.

---

Create Premium Metallic Packaging Prototypes

Produce high-impact, heat-sealed snack packaging proofs with 2mil White Metallized Poly Film.

Shop More JetComp Media