MacTac Roodle 6.0 Mil White Matte Removable Vinyl
Price:$319.00
MacTac ROODLE RO628 White Matte Removable Vinyl
MacTac ROODLE RO628 is a 6.0 mil matte white removable wall vinyl engineered for indoor wall murals, posters, and large-format graphics. Built on a semi-rigid calendared PVC film with an aggressive removable acrylic adhesive, MacTac ROODLE RO628 delivers strong initial tack with clean removability for up to two years on properly prepared painted drywall.
Designed for UV, UVgel, solvent, eco-solvent, and latex printing platforms, MacTac ROODLE RO628 supports edge-to-edge printing without borders while maintaining dimensional stability and lay-flat performance during production and installation.
Why Choose MacTac ROODLE RO628 White Matte Removable Vinyl
When your project requires bold indoor wall graphics with dependable adhesion and planned removability, MacTac ROODLE RO628 provides the performance balance production teams demand.
- 6.0 Mil Semi-Rigid PVC: Stable matte white surface for murals and posters
- Aggressive Removable Acrylic Adhesive: Strong hold with up to 2 year removability
- Edge-to-Edge Printing: No white border required
- Multi-Platform Print Compatibility: Latex, Solvent, Eco-Solvent, UV, UVgel
- Low VOC Adhesive System: Indoor-friendly performance
- 4 Year Outdoor Durability (Unprinted Film): Added versatility for specialty uses
- Class A Fire Rating: Meets ASTM E84, ANSI/NFPA 255, and IFC standards
- 90# SuperFlat™ Liner: Excellent lay-flat and print stability
Applications
- Indoor wall murals
- Retail wall graphics
- Office branding
- Event graphics
- Trade show interior graphics
- School wall displays
- Restaurant interior branding
- Large format decals
Performance & Durability
- Removability: Up to 2 years after application
- Unprinted Film Outdoor Durability: 4 years
- Minimum Application Temperature: 32°F
- End Use Temperature Range: -40°F to 180°F
- Shelf Life: 2 years at 60 to 77°F and 50% relative humidity
For extended color stability and surface protection, laminate with Permacolor ColorGard LUV Series or PromoGard overlaminates.
Key Specifications
- Film Thickness (Film + Adhesive): 0.007 inches (7 mil total construction)
- Facestock Thickness: 6.0 mil
- Finish: Matte white
- Adhesive: Aggressive removable acrylic
- Liner: 90# SuperFlat™ PE-coated kraft
- Width: 54 inches and 60 inches
- Length: 100 feet
Installation Overview
MacTac ROODLE RO628 performs best on smooth, flat, painted drywall surfaces.
- Allow freshly painted walls to cure at least one week
- Clean wall with alcohol wipe before installation
- Apply at room temperature when possible
- Use squeegee from center outward to eliminate air pockets
- Plan 1 inch overlap for multi-panel murals
- Remove slowly at a 90 degree angle
Always test a small section prior to full production, especially on specialty paints or sealed surfaces.
Limitations
- Not recommended for textured walls, stucco, or scrub-able silicone paints
- Adhesion may increase over time on polystyrene or soft vinyl substrates
- Substrate condition determines removability results
- Special care required below 50°F to prevent brittleness
FAQ
Can MacTac ROODLE RO628 be removed cleanly?
Yes. It removes cleanly for up to two years from properly prepared painted drywall surfaces.
Is it suitable for outdoor wall murals?
The unprinted film carries 4 year outdoor durability, but it is primarily designed for indoor wall applications.
Does it require lamination?
Lamination is optional but recommended when additional surface protection or color longevity is required.
Can I print full bleed without a border?
Yes. It supports true edge-to-edge printing.
What surfaces should I avoid?
Avoid textured drywall, stucco, scrub-able silicone paints, and uncured paint surfaces.
Compatibility
MacTac ROODLE RO628 supports:
- Latex printers
- Solvent printers
- Eco-Solvent printers
- UV Inkjet printers
- UVgel printers
- UV screen printing
Install Bold Wall Graphics With Confidence
Choose MacTac removable wall vinyl engineered for professional mural applications and controlled removability.
Additional information
| Weight | 37 lbs |
|---|---|
| Dimensions | 54.0 × 10.0 × 10.0 in |