MacTac Textured Overlam 3.75mil
Price:$327.00
MacTac Permacolor PermaFlex PF6400 3.75 mil Textured Overlaminate
MacTac Permacolor PermaFlex PF6400 3.75 mil Textured Overlaminate is a clear polypropylene cold overlaminate engineered for short term indoor graphics that require glare reduction and added surface protection. Designed for cold roll lamination, this film delivers efficient finishing without heat, reducing production time while protecting printed images in retail, trade show, and light duty floor environments.
PF6400 features a textured gloss surface that enhances visual appeal while minimizing glare under overhead lighting, making it an excellent choice for indoor wall graphics and limited duration floor graphics in low traffic areas.
Why Choose MacTac Permacolor PermaFlex PF6400 3.75 mil Textured Overlaminate
This overlaminate adds protection and improved visual performance to indoor graphics without complicating finishing processes.
- Textured gloss finish: Reduces glare and creates a unique viewing surface
- Cold roll application: No heat required for fast, efficient processing
- Slip resistance tested: Suitable for short term interior floor graphics in dry areas
- Permanent adhesive system: Provides secure bonding to printed graphics
- Chemical resistant surface: Withstands water, detergent, mild acids, and ammonia exposure
Applications
- Indoor floor graphics, dry low traffic areas
- Retail wall graphics
- Trade show displays
- Interior POP signage
- Museum and gallery graphics
- Promotional graphics
Key Features
- Film Type: Clear polypropylene
- Thickness: 3.75 mil
- Finish: Textured gloss
- Adhesive: Permanent pressure sensitive
- Liner: 1.2 mil PET release liner
- Indoor Floor Durability: Up to 1 month
- Interior Vertical Durability: Up to 1 year
- Application Temperature: 50°F to 100°F
- End Use Temperature: -40°F to 180°F
- Chemical Resistance: No effect from water, detergent, gasoline, mild acid, or ammonium hydroxide
- Width: 54 inches
- Length: 150 feet
Specifications
- Total Thickness (film + adhesive): 4.7 mil nominal
- Peel Adhesion (24 hr on glass): 2.0 lb/in
- Slip Resistance: Tested per UL410 and ANSI A137.1 standards
- Adhesive pH: Neutral
- Shelf Life: 2 years when stored at 60°F to 77°F and 50% relative humidity
Durability
MacTac Permacolor PermaFlex PF6400 is designed strictly for indoor use:
- Floor Graphics: Up to 1 month in dry conditions
- Vertical Interior Graphics: Up to 1 year
Wet conditions are not recommended for floor applications.
Installation & Finishing Recommendations
- Allow a 2 to 4 hour wet out period before rolling laminated graphics
- Roll graphics with the laminate side inward for transport
- Maintain a minimum inside roll diameter of 3 to 5 inches for graphics under 10 mil total thickness
- For thicker builds, increase roll diameter to 10 to 12 inches
Proper handling improves bond strength and reduces silvering in rolled graphics.
FAQ
Can MacTac PF6400 be used outdoors?
Use MacTac PF6400 for indoor applications only. Do not expose it to outdoor conditions.
Is this laminate suitable for wet floor environments?
Use this laminate only for dry interior floor graphics in low traffic areas. Avoid wet floor environments.
Does PF6400 require heat for lamination?
PF6400 applies through cold roll lamination and does not require heat.
Can this media be used over UV printed graphics?
Yes. Allow additional wet out time to reduce silvering before rolling laminated graphics.
Is it appropriate for long term retail floor graphics?
Limit floor applications to approximately one month in dry, low traffic conditions.
Protect Your Indoor Graphics with Confidence
Add glare reduction, slip resistance, and surface protection to your next indoor project with MacTac Permacolor PermaFlex PF6400.
Additional information
| Weight | 5.0 lbs |
|---|---|
| Dimensions | 0.0 × 0.0 × 0.0 in |
| Size Options |