MacTac WP129 Perforated Window Film
Price:$579.00
IMAGin® WindowView™ WP129 Perforated One-Way Visibility Film
MacTac IMAGin® WindowView™ WP129 Perforated Window Film is a 6 mil soft white vinyl engineered for one-way visibility window graphics. Featuring a 60/40 perforation pattern with 1.6 mm holes and 2.4 mm spacing, WP129 delivers bold advertising on the printed side while maintaining see-through visibility from the opposite side.
Designed for solvent, eco-solvent, latex, UV inkjet, and screen printing systems, WP129 provides reliable print performance and dependable semi-permanent adhesion for promotional window and vehicle graphics.
Why Choose IMAGin® WindowView™ WP129
WP129 allows brands to maximize glass surfaces for advertising without sacrificing interior visibility or natural light.
- 60/40 One-Way Visibility: Prominent exterior graphics with interior see-through clarity.
- Black Semi-Permanent Adhesive: Optimizes contrast and image density from the viewing side.
- Removable Performance: Designed for promotional campaigns and medium-term advertising.
- Wide Print Compatibility: Supports solvent, eco-solvent, latex, UV inkjet, UV screen, and solvent screen inks.
- Heat and Glare Reduction: Helps reduce solar gain inside vehicles and glass buildings.
Applications
- Exterior window graphics
- Vehicle and transit advertising
- Retail storefront promotions
- Public transportation graphics
- Glass-walled buildings
- Interior surveillance applications
- Department stores and stock rooms
Key Features
- 6 mil soft white perforated PVC film
- 60/40 perforation pattern
- 1.6 mm hole diameter
- Black semi-permanent adhesive
- 86# stable white kraft liner
- Designed for flat glass surfaces
- Outdoor durability up to 1 year unprinted
Specifications
- Thickness: 6 mil
- Perforation Pattern: 60/40
- Hole Diameter: 1.6 mm
- Hole Spacing: 2.4 mm
- Adhesive Type: Semi-permanent black acrylic
- Liner: 86# stable white kraft
- Outdoor Durability (Unprinted): 1 year
- Minimum Application Temperature: 50°F
- Service Temperature Range: 0°F to 140°F
- Shelf Life: 1 year when stored at 60–77°F and 50% RH
Printing Recommendations
- Print in controlled environments at approximately 73°F and 50% relative humidity
- Do not exceed 270% ink saturation
- Allow solvent and eco-solvent prints to dry 24–48 hours before lamination
- Ensure prints are fully dry before rolling or transporting
For environments exposed to abrasion, pollution, or scratching, laminate with an optically clear film such as Permacolor SAG 38 or LF3648 RAYZor for extended durability.
Installation Guidelines
- Use the dry application method
- Do not use wet application, as moisture can become trapped in perforations
- Trim at least 1/8 inch away from rubber window seals
- Trim beveled glass edges at a 45° angle to reduce edge lift
- Avoid use over emergency exit window seals
FAQ – IMAGin® WindowView™ WP129
What is the perforation pattern of WP129?
WP129 features a 60/40 perforation pattern, meaning 60% printable surface and 40% open area. This balance delivers strong image visibility from the outside while maintaining see-through visibility from the inside.
Can you use IMAGin® WindowView™ WP129 on vehicles?
Yes. It is commonly used for vehicle and public transportation advertising on flat glass surfaces. Avoid applying over rear window defroster lines or using rear wipers, as this may impact performance.
What printers are compatible with WP129?
WP129 is compatible with solvent, eco-solvent, latex, UV inkjet, UV screen, and solvent screen printing systems. Always use proper ICC profiles and printer settings for best results.
Does it require lamination?
Lamination is not always required for short-term promotions. However, for graphics exposed to abrasion, pollution, or harsh conditions, lamination with an optically clear overlaminate is recommended to extend durability.
What is the outdoor durability?
The unprinted film offers up to 1 year outdoor durability. Printed graphic longevity depends on ink, environmental exposure, and whether an overlaminate is used.
Can it be installed using the wet method?
No. The dry application method is strongly recommended. Wet installation can trap moisture within perforations and reduce visibility performance.
Turn Glass into Advertising Space
Choose MacTac IMAGin® WindowView™ WP129 to create high-impact window graphics with clear one-way visibility and dependable promotional performance.
Additional information
| Weight | 15.0 lbs |
|---|---|
| Dimensions | 54.0 × 10.0 × 10.0 in |