STS Direct to Film Curing Ovens
Price: Select an Option
STS Direct to Film Curing Ovens
STS Direct to Film Curing Ovens are purpose-built heating units designed to cure TPU adhesive powder during the Direct to Film printing process. These ovens provide controlled, even heat and precise timing to ensure proper powder gelling before heat transfer. Compact footprints and simple digital controls make them ideal for production environments where consistency and repeatability matter.
Designed to work seamlessly with STS DTF inks, films, and powders, these curing ovens help deliver durable transfers with a soft finish and strong adhesion across a wide range of garments.
Why Choose STS Direct to Film Curing Ovens
Consistent powder curing is critical to long-lasting DTF transfers. STS curing ovens eliminate guesswork by providing stable temperatures and programmable timers, helping reduce transfer failures caused by uneven or under-cured adhesive. Audible alerts notify operators when curing is complete, supporting efficient production without constant monitoring.
Designed for Reliable DTF Powder Curing
STS curing ovens initiate the adhesive gelling process at the touch of a button. Once the programmed time has elapsed, an acoustic alarm signals that the film is ready for transfer. This controlled approach helps prevent scorching, under-curing, or inconsistent results that can occur when using alternative methods.
What Is DTF Printing
Direct to Film printing allows designs to be printed onto coated PET film and later transferred onto fabric using a TPU adhesive powder. After printing, the powder is applied to the wet ink and then cured in a dedicated DTF curing oven. Once cured, the transfer is ready to be heat pressed onto the final garment.
Key Features
- Digital temperature and time controls for precise curing
- Audible alarm signals when curing cycle is complete
- Compact designs with small footprints
- Designed specifically for TPU powder curing
- Simple, operator-friendly controls
- Supports consistent transfer quality
Available Models and Capacity
- Drawer Model: Cures film up to 13 x 17 inches
- Open-Top Model: Cures film up to 15 x 24 inches
Specifications
- Maximum Temperature: Up to 302°F
- Power Supply: 110V
- Power Consumption: 1,350 watts
- Digital Timer Range: 0–999 seconds
Dimensions
- Drawer Model: 23 x 6.6 x 15.7 inches
- Open-Top Model: 27 x 6 x 19.5 inches
Applications
- Curing TPU adhesive powder for DTF transfers
- Manual or automatic powder application workflows
- Small to mid-size DTF production environments
Consistent DTF Results Start with Proper Curing
STS Direct to Film Curing Ovens provide the controlled heat and timing required for reliable TPU powder curing. Contact Big Systems to determine the best oven configuration for your DTF setup or to bundle with STS inks, film, and powder.
Additional information
| Weight | 100.0 lbs |
|---|---|
| Dimensions | 27 × 6 × 19.5 in |
| Size Options | 23 x 6.6 x15.7 (drawer model), 27 x 6 x 19.5 (open top model) |