General Formulations 790AE Print-n-Privacy Light Etch Air-Egress
Price: Select an Option
General Formulations 790AE Print-N-Privacy Light Etch Air-Egress GF790AE-5475
Printable glass etch privacy film General Formulations 790AE Print-N-Privacy Light Etch is a 3.0 mil decorative polymeric vinyl designed to simulate the look of etched glass while supporting both printed and unprinted applications. This light-etch film features a clear permanent solvent acrylic adhesive and a 90 pound air-egress liner that enables clean, dry application for large format window graphics and privacy installations.
Designed for commercial and residential glass surfaces, this film delivers a refined etched appearance while allowing installers to print custom graphics or install it unprinted for a classic frosted effect.
Why Choose Printable Glass Etch Privacy Film
GF 790AE Print-N-Privacy Light Etch supports professional glass graphics where visual privacy, clean aesthetics, and installation control matter.
- Light Etched Appearance simulates the look of etched glass
- Printable or Unprinted Use supports decorative graphics or privacy-only installs, or both
- Air-Egress Liner enables dry application with reduced bubbles
- Permanent Clear Adhesive delivers long-term performance on glass
- Wide Ink Compatibility supports common wide format ink technologies
Applications
- Glass Windows
- Glass Doors
- Office and Conference Room Glass
- POP and Indoor Signage
- Commercial and Residential Privacy Graphics
Dry application only. Designed specifically for glass surfaces.
Key Features
- 3.0 mil polymeric light-etch glass vinyl
- Clear solvent-based permanent acrylic adhesive
- 90 pound air-egress liner for easy dry application
- Decorative etched-glass appearance
- Accepts printing or unprinted installation
- Designed for long-term indoor and outdoor use
Specifications
Film
- Film Type: Light-Etched Polymeric Vinyl
- Film Thickness: 3.0 mil (76 µm ±10%)
- Film Weight: 95 gsm
- Gloss (60°): <10
- Opacity: 25%
- Tensile Strength:
- MD >3000 lbs/in
- CD >2800 lbs/in
- Elongation:
- MD >180%
- CD >200%
- Dimensional Stability (FTM 14):
- MD <0.50 mm
- CD <0.30 mm
Adhesive
- Adhesive Type: Solvent Acrylic
- Adhesive Thickness: 0.8–1.0 mil (20–25 µm)
- Adhesive Color: Clear
- Peel Strength on Glass:
- 15 min: 3.5 lbs/in (15 N/25 mm)
- 24 hrs: 4.2 lbs/in (18 N/25 mm)
Liner
- Liner Type: White PE-Coated Kraft, Air-Egress
- Liner Weight: 100 lb (160 gsm)
- Liner Thickness: 7.8 mil (198 µm)
- Release Force @ 300 in/min: 55–75 g/2 in
Performance
- Application Temperature: Above 40°F
- Service Temperature: -40°F to 200°F
- Outdoor Durability: Up to 7 years
- Shelf Life: 1 year
- Storage Conditions: 70°F at 50% relative humidity
Ink Compatibility
- Solvent
- Eco-Solvent
- Latex
- UV Curable
Compatibility
Printable glass etch privacy film GF 790AE works with wide format printers using solvent, eco-solvent, latex, and UV curable inks. Designed exclusively for glass substrates.
Not intended for repositioning or cut lettering due to permanent adhesive construction.
FAQ
Can this film be used printed or unprinted?
Yes. Installers can print graphics directly on the film or apply it unprinted to create a classic etched glass appearance.
Is this film repositionable?
No. The permanent adhesive is designed for long-term installations and does not support repositioning.
Should I use a standard squeegee?
Use a soft-edge or Teflon-covered squeegee. Hard squeegees may leave impressions due to the translucent film structure.
Is wet application recommended?
No. Air-egress adhesives require dry application only. Wet application can trap fluid and create bubbles.
Create Privacy Without Sacrificing Design
Choose printable glass etch privacy film GF 790AE for refined etched visuals, clean installation, and long-term performance on glass.
Additional information
| Weight | 30.0 lbs |
|---|---|
| Dimensions | 0.0 × 0.0 × 0.0 in |
| Size Options |