MacTac Gloss Hard-Coated PET Dry-Erase PSA Film

MacTac Gloss Hard-Coated PET Dry-Erase PSA Film PermaGard High Gloss Dry-Erase PGD6054L150 54″ x 150′

MacTac Gloss Hard-Coated PET Dry-Erase PSA Film PermaGard High Gloss Dry-Erase PGD6054L150 transforms printed graphics into interactive dry-erase surfaces. This optically clear, hard-coated polyester overlaminate adds gloss, protection, and reusable write-on functionality to wide format graphics.

Engineered as part of the PERMACOLOR system, this pressure sensitive laminate applies with cold roll lamination and delivers smooth marker performance for both indoor and limited outdoor use.

---

Why Choose MacTac Gloss Hard-Coated PET Dry-Erase PSA Film

MacTac Gloss Hard-Coated PET Dry-Erase PSA Film delivers interactive functionality while protecting your printed graphics.

• Hard-Coated Dry-Erase Surface: Supports repeated writing and erasing with low odor dry-erase markers.
• Optically Clear PET Film: Maintains image clarity and gloss without distorting underlying graphics.
• Pressure Sensitive Adhesive: Enables efficient cold roll lamination without heat.
• Indoor and Short Term Outdoor Use: Rated for up to 1 year outdoor durability.
• Abrasion and Moisture Protection: Shields prints from handling, moisture, and environmental exposure.

---

Applications

• Interactive wall graphics
• Educational charts and boards
• Retail promotional displays
• Office planning boards
• Training graphics
• Menu boards
• Short term outdoor information boards

---

Key Features

• Film Type: Polyester (PET)
• Finish: Hard coated high gloss dry-erase
• Color: Optically clear
• Thickness: 1.2 mil PET film, 3.2 mil total product
• Adhesive Type: Permanent clear acrylic pressure sensitive
• Liner: 78# white kraft release liner
• Width: 54 inches
• Length: 150 feet
• Outdoor Durability: Up to 1 year
• Application Temperature: Above 40°F
• End Use Temperature: -40°F to 180°F

---

Specifications

Thickness:

• Film plus adhesive: 0.0020 inches
• Total product: 0.0032 inches

Quick Tack on Stainless Steel:

• 1.5 lb/in

Peel Adhesion on Stainless Steel:

• 15 minutes: 1.9 lb/in
• 24 hours: 2.5 lb/in

---

Dry-Erase Performance

This hard-coated PET surface supports common low odor dry-erase markers including:

• EXPO Low Odor
• Quartet EnduraGlide
• Marks-A-Lot
• Bic Low Odor
• Staples Remarx
• Crayola Dry Erase Crayon

For best results:

• Remove writing within a reasonable timeframe
• Expect light ghosting over extended periods, especially with red pigments
• Clean with approved dry-erase board cleaner
• Avoid household detergents or glass cleaners

Always test marker compatibility before full production.

---

Printing Compatibility

Apply over digitally produced images from:

• Solvent inkjet
• Eco-solvent inkjet
• UV inkjet
• Water-based inkjet (pigmented and dye)
• Electrostatic
• Thermal transfer resin ribbons

---

Storage & Handling

• Store at approximately 75°F and 50% relative humidity
• Keep rolls on end or suspended from the core
• Apply using cold roll lamination only
• Prepare mounting surfaces properly before application

---

FAQ

Can this film turn any print into a dry-erase surface?
Yes. Laminate MacTac Gloss Hard-Coated PET Dry-Erase PSA Film over compatible graphics to create a reusable dry-erase surface.

Is it suitable for outdoor use?
Yes. It supports up to 1 year outdoor durability.

Can I use any dry-erase marker?
Most low odor dry-erase markers perform well. Always test specific brands before full installation.

Can I clean it with glass cleaner?
No. Use only dry-erase board cleaner to maintain surface integrity.

---

Make Your Graphics Interactive

Choose MacTac Gloss Hard-Coated PET Dry-Erase PSA Film to add write-on functionality and professional protection to your printed graphics.

Shop More MacTac Media Products