MacTac Gloss Perm. M-Series

MacTac IMAGin® PrintVinyl PVG329P Gloss White Permanent Gray Adhesive

MacTac IMAGin® PrintVinyl PVG329P is a 3.2 mil opaque gloss white soft calendared vinyl engineered for UV, UVgel, latex, and solvent-based inkjet printing. Designed with a gray permanent acrylic pressure sensitive adhesive and 78# clay coated liner, this versatile print media delivers strong adhesion, excellent opacity, and consistent image quality for general purpose signage and promotional graphics.

Built for indoor and short term outdoor advertising, MacTac IMAGin® PrintVinyl PVG329P performs reliably on flat and slightly curved surfaces.

---

Why Choose MacTac IMAGin® PrintVinyl PVG329P

MacTac IMAGin® PrintVinyl PVG329P provides balanced performance for everyday production environments.

• 3.2 Mil Gloss White Film: Smooth soft calendared PVC supports vibrant color and sharp detail.
• Gray Permanent Adhesive: Opaque acrylic adhesive enhances coverage over darker substrates.
• Multi-Print Compatibility: Designed for UV, UVgel, latex, solvent, eco-solvent, screen printing, and HP Indigo.
• Dimensional Stability: 0 percent shrinkage after 48 hours at 158°F.
• Indoor Durability 4 Years: Dependable long term interior graphics.
• Outdoor Durability Up to 3 Years: Suitable for short term exterior promotions.

---

Applications

• Indoor advertising graphics
• Short term outdoor signage
• Retail displays
• Promotional campaigns
• Event graphics
• P.O.P. signage
• Flat and slightly curved surface applications

---

Key Features

• Film Type: Gloss white soft calendared vinyl (PVC)
• Thickness: 3.2 mil
• Adhesive Type: Permanent opaque gray acrylic pressure sensitive
• Liner: 78# clay coated liner
• Width: 54 inches
• Length: 150 feet
• Minimum Application Temperature: 50°F
• End Use Temperature: -40°F to 180°F
• Outdoor Durability: Up to 3 years unprinted

---

Specifications

Peel Adhesion 180°:

• On steel 30 minutes: 3.00 lb/in
• On steel 24 hours: 4.40 lb/in
• On glass 30 minutes: 3.00 lb/in
• On glass 24 hours: 4.40 lb/in

Quick Tack on Stainless Steel:

• 2.0 lb/in²

Dimensional Stability:

• 0 percent shrinkage after 48 hours at 158°F

---

Printing & Laminating Guidelines

• Print in controlled conditions around 73°F and 50% relative humidity
• Maximum ink saturation should not exceed 270 percent
• Allow solvent and eco-solvent prints to dry 24 to 48 hours before lamination
• Laminate with Permacolor ColorGard LUV Series or PromoGard for enhanced durability in demanding environments
• Wet application is not recommended due to the water based adhesive

---

Durability

• Indoor: Up to 4 years
• Outdoor Unprinted Film: Up to 3 years

Graphic longevity depends on ink quality, environmental exposure, and whether an overlaminate is applied.

---

FAQ

Is MacTac IMAGin® PrintVinyl PVG329P compatible with UVgel printing?
Yes. MacTac IMAGin® PrintVinyl PVG329P supports UV, UVgel, latex, solvent, and eco-solvent inkjet printing systems.

Can this vinyl be used outdoors?
Yes. MacTac IMAGin® PrintVinyl PVG329P delivers up to 3 years of outdoor durability for the unprinted film.

Should it be laminated?
Add a compatible overlaminate to increase abrasion resistance and delay color fading in exterior or high traffic applications.

Is wet installation allowed?
No. Avoid wet application methods because they can weaken adhesive performance.

---

Dependable Gloss Vinyl for Everyday Graphics

Choose MacTac IMAGin® PrintVinyl PVG329P for consistent print quality and reliable short term outdoor performance.

Shop More MacTac Media Products