MacTac STR328 StreetWrap

MacTac STR328 StreetRAP

MacTac STR328 StreetRAP is a 4.0 mil matte white PVC film engineered specifically for outdoor sidewalk and parking lot floor graphics. Designed for pedestrian traffic on concrete and asphalt, this high-tack street graphic vinyl delivers aggressive adhesion, dependable durability, and high-impact print performance across solvent, eco-solvent, latex, UV, and UVgel platforms.

Built for demanding exterior environments, MacTac STR328 StreetRAP combines a rugged facestock with a permanent blended acrylic/rubber adhesive system that bonds securely to smooth and slightly rough pedestrian surfaces.

---

Why Choose MacTac STR328 StreetRAP

When outdoor graphics demand traction, durability, and strong adhesion to challenging substrates, MacTac STR328 StreetRAP provides a purpose-built solution for high-visibility ground messaging.

• Engineered for Pavement: Bonds aggressively to concrete and asphalt pedestrian surfaces
• High Tack Permanent Adhesive: 3 mil blended acrylic/rubber adhesive system
• Outdoor Pedestrian Durability: 3 months to 1 year depending on traffic and surface
• Slip-Resistant System Ready: Designed to laminate with Permacolor PF6600 for ANSI/NFSI B101.3 compliance
• Wide Print Compatibility: Solvent, Eco-Solvent, Latex, UV, UVgel, and screen printable
• Class A Fire Rating: Meets ASTM E84-01, ANSI/NFPA 255, and IFC 8-1
• Vertical Durability: Unprinted film rated up to 5 years on vertical surfaces

---

Applications

• Sidewalk advertising
• Parking lot promotions
• Retail store entrances
• Convention centers
• Sports arenas
• School campuses
• Plant safety messaging
• Wayfinding graphics
• Marathon and parade route branding
• Concrete pillars and cinder block walls (with standard overlaminate)

---

Slip Resistance & Lamination Requirement

For exterior floor graphics, laminate MacTac STR328 StreetRAP with Permacolor® PF6600 textured 6 mil PVC overlaminate. This system exceeds ANSI/NFSI B101.3 and B101.1 standards for high traction surfaces based on DCoF testing protocols.

To maintain traction performance:

• Clean periodically with soap and water using a brush
• Remove the graphic once traction rating declines
• Do not use under vehicular traffic

---

Key Features

• 4.0 mil matte opaque white PVC film
• 3 mil aggressive permanent adhesive
• 90# SuperFlat™ P.E. coated kraft liner
• Removable from unsealed concrete
• Not recommended for sealed concrete or efflorescent surfaces
• Designed for pedestrian traffic only

---

Specifications

• Film Thickness: 4.0 mil
• Adhesive: Permanent blended acrylic/rubber
• Liner: 90# SuperFlat™
• Width: 54 inches
• Length: 150 feet
• Minimum Application Temperature: 50°F
• End Use Temperature Range: 32°F to 225°F
• Shelf Life: 2 years when stored at 60 to 77°F and 50% RH

---

Installation Guidelines

• Apply only to dry surfaces in dry weather above 50°F
• Surface must remain dry for at least 24 hours prior to install
• Use firm pressure and squeegee or short bristle brush
• Round corners to reduce edge lift
• Butt seams for multi-panel installs, do not overlap
• Avoid sealed concrete and newly poured concrete with efflorescence

---

Limitations

• Not designed for vehicular traffic
• Not intended as a conformable wall wrap
• Removal from varnished, stucco, or drywall surfaces may cause damage
• Always test prior to full installation

---

FAQ

How long will MacTac STR328 StreetRAP last outdoors?
Expect 3 months to 1 year for pedestrian floor applications depending on traffic and surface conditions.

Can this product be used without lamination?
No. Exterior floor graphics require Permacolor PF6600 overlaminate to achieve slip resistance compliance.

Is it removable?
Yes, removal is possible from unsealed concrete using short, quick pulls at a low angle. Do not use heat during removal.

Can I install it on sealed concrete?
Sealed concrete may result in a permanent bond. Always test first.

Is it safe for vehicle traffic?
No. This product is designed for pedestrian traffic only.

---

Compatibility

MacTac STR328 StreetRAP is compatible with:

• Solvent printers
• Eco-Solvent printers
• Latex printers
• UV Inkjet printers
• UVgel printers
• UV and solvent screen printing

---

Build High-Impact Pavement Graphics

Choose a MacTac purpose-built street graphic vinyl engineered for pedestrian durability and high-traction performance.

Shop More MacTac Media Products