General Formulations 208 White Static Cling

GF 208 White Static Cling Vinyl for Window Graphics

White static cling vinyl GF 208 is a premium 7.0 mil white static cling film engineered for temporary window graphics and short-term signage where clean removability and repositionability matter. This non-adhesive, flexible calendered vinyl relies on static cling to bond to smooth glass surfaces, making it ideal for promotions, POP displays, and seasonal messaging. Printed on a 90 lb layflat liner, the material handles easily during production and installation while supporting common wide-format ink technologies.

Why Choose This White Static Cling Vinyl

GF 208 delivers simple installation and clean removal for temporary glass applications without adhesive residue.

• Non-Adhesive Static Cling: Clings to glass without adhesive for easy repositioning and removal
• Premium Thickness: 7.0 mil construction provides durability and easy handling
• Matte White Opacity: Supports readable graphics with strong coverage
• Layflat Liner: 90 lb liner improves stability during printing and cutting
• Temporary Exterior Use: Designed for short-term outdoor window graphics

Applications

• Window Graphics: Retail promotions and seasonal messaging
• POP Displays: Temporary in-store signage
• Decals: Short-term branding and informational graphics
• Protective Masking: Temporary surface protection on glass

Key Features

• Film Construction: 7.0 mil white static cling calendered vinyl
• Adhesive System: None, static cling only
• Surface Compatibility: Smooth glass and acrylic
• Finish: White, high-opacity surface
• Use Environment: Indoor and short-term outdoor window applications

Compatibility

This static cling vinyl applies to clean, smooth glass surfaces. Install with either dry or wet application methods. For best results on larger graphics, use a wet application technique with approved application fluid and a wet-edged squeegee. Always test before full production.

Specifications

• Film Type: White monomeric static cling vinyl
• Color: White
• Finish: Opaque white
• Film Thickness: 7.0 mil
• Film Weight: 220 grams per square meter
• Opacity: 95 percent
• Gloss Level: Greater than 90 at 60 degrees
• Tensile Strength:
  • Machine Direction: greater than 2,500 lbs per inch
  • Cross Direction: greater than 2,000 lbs per inch
• Elongation:
  • Machine Direction: greater than 300 percent
  • Cross Direction: greater than 300 percent
• Dimensional Stability: Not applicable
• Adhesive Type: None, static cling
• Release Liner: White, two-sided PE-coated kraft
• Liner Weight: 90 lb
• Liner Thickness: 6.7 mil
• Release Force: 25 to 30 grams per 2 inches
• Application Temperature: Above 40 degrees Fahrenheit
• Service Temperature Range: Minus 40 to 200 degrees Fahrenheit
• Shelf Life: 6 months when stored at 70 degrees Fahrenheit and 50 percent relative humidity
• Outdoor Durability: Up to 3 months on exterior glass
• Removability: Changeable and repositionable
• Core Size: 3 inches

FAQ

What applications does this static cling vinyl support?
This material supports window decals, POP displays, temporary product markings, and protective masking on smooth glass surfaces.

Should you apply this material wet or dry?
You can use either method. Wet application works best for large graphics and helps achieve a smooth, bubble-free install.

Can you apply this vinyl to the inside and outside of a window?
Yes. Apply the non-printed side to the glass for best results. Applying the printed side may cause ink transfer during removal.

What surface preparation is required?
Clean the surface thoroughly and allow it to reach room temperature. Cold surfaces reduce static cling performance.

Create Clean, Changeable Window Graphics

Choose GF 208 for easy installation, repositioning, and removal in short-term window applications.